I also sell: 23232-E1A-KM bearing 24140RR bearing 23218ESK.TVPB + AHX3218 bearing BT2B332871 / HA4 bearings 7218BDF bearing 81593 / 81963CD bearing 6304ZR bearing AOH3180G bearing 4T-898/892 bearing 62042RU bearing NJ2307EC bearing GEZM600ES bearing NA6911UU bearing B7007E.T Bearing 234717M Bearing
   Ball Shenzhen 7202AC / DT bearing NSK sample diagram
[7202AC / DT bearing】 Size Specifications:
Bearing Type: 7202AC / DT bearing
Inner diameter: 15mm
Outer diameter: 35mm
Thickness: 22mm
Bearing series: angular contact ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported NTN Bearing
   characteristic
    1, universally matchable bearings are universally matchable bearings through special processing, when the bearing is installed close to each other, any combination can achieve the established internal clearance or preload, and the average load distribution, without having to use pads sheet or the like.
    Paired bearings in: When there is insufficient load-carrying capacity of a single bearing (using blow-linked configuration) or when to bear combined load or the axial load in both directions (with back to back or face to face configuration).
    2, the basic design bearings (can not be used universally matchable) for single bearing configuration
    Single row angular contact ball bearings are mainly applied the basic design configuration, only one bearing at each location. Its width and the projecting amount of general tolerances. Therefore not suitable for the two single row angular contact ball bearings against the installation.
   NSK bearing material
    g-- rings, rolling elements of hardened steel.
    H-- rings, rolling elements made of stainless steel.
   NSK bearing cage
    M-- copper alloy solid cage.
    T-- synthetic resin cage.
    W-- stamping cage.
    V-- no cage.
   NSK bearing seals, dust cover
    Z, ZS-- side with steel dust cover.
    ZZ, ZZS-- both sides with steel dust cover.
    D, DU-- side with a contact rubber seals.
    DD, DDU-- both sides with a contact rubber seals.
    V-- side with a non-contact rubber seals.
    VV-- both sides with a non-contact rubber seals.
   We recommend the following models: 51414-MP bearings F694ZZ bearings 61816-Z bearings NJ410 + HJ410 bearing YAR205-2RF / VE495 bearing TTUE60 bearing 140KBE2302 + L Bearing 71903C bearing NF28 / 1000ECMP / HA1 bearings SL024856 bearings 7202AC / DT bearing
   I also recommend you 7202AC / DT bearing purposes: rolling guide, slaughtering and meat processing equipment early, machine horn, feed processing equipment, drill sets, forestry machinery, top, thimble, agricultural machinery parts, machine Post, fertilizer processing equipment, and other purposes.