Measuring bearing radial clearance Notes
(1) If possible, using a dedicated instrument measurement;
(2) Hand measurement requires the measurement have a higher measurement skills. When this measurement error is large, especially clearance at the edge of the state, prone to error, this time, the measurement instrument shall prevail;
(3) feeler, shall be handled as specified in the standard may not be used past the roller method of measuring feeler from the roll;
(4) the measurement process, should ensure that the ball fall into the ditch; closed-bearing measure before closed; there is charge when using equipment, measurement value minus the gap should increase the amount of travel loads.
(5) For multi-column bearing clearance eligibility requirements for each column, each row arithmetic mean clearance as the radial bearing
