1, anti-rust technology management
In order to ensure rust-proof process can seriously implement technology developed in accordance with the process requirements at a specific assessment rules, in terms of composition and value of the production plant for an assessment. By the level of anti-rust manager
Members monthly production plant for process discipline inspection of the cooling water, rust fluid, cleaning fluid, anti-rust oil rust rate management and finished bearings, cleanliness and oiled packaging case, anti-rust
Inspection of the members of management and monitoring of projects to conduct a comprehensive examination, assessment scoring, issued under the production plant and evaluation results. From top to bottom to establish a network of anti-rust management, so that the anti-
Rust work has a good management foundation.
2, anti-rust auxiliary materials management
Rust-proof material quality directly affects the quality of product processing, so the choice of rust-proof material, the first by the quality requirements for physical and chemical properties testing, after passing the test carried out, in line with
Process requirements to large quantities. Selected anti-rust auxiliary materials used rigorous testing according to the quality standards of different materials into the plant after the qualified supply sector released for use by rear
. On a regular basis in the course of rust-proof material and preparation of the solution for testing to ensure that the concentration and ratio of the solution meet the technical requirements to achieve performance. Create a complete timber
Material inspection system and quality inspection standards, improve anti-rust management to provide a reliable guarantee.
3, the cooling water management
Cooling water bearing processing multiple roles mainly from cooling, lubrication, cleaning, rust, etc., its direct impact on the proper use and maintenance of surface quality of machined parts, affect the use of the tool
life. Los axis of cooling water used can be divided into soda water, emulsion and synthetic grinding fluids are three basic uses more than 50 tons of large recycling bath, wash down the grinding product
At the end of the wheel, at the end of the iron and oil can easily lead to spoilage of cooling water, causing burns and corrosion of machined parts. Strengthen scientific management of cooling water can improve its performance, ensure productivity
Product quality and reduce the cost of cooling water.
(1) cooling water samples twice a week for laboratory testing, for valid content of cooling water, PH value, corrosion resistance, lubricity, identify problems and timely adjustment resolved.
(2) Regular Cleaner, filtered, reducing bacterial growth sources.
(3) often start air agitation (especially holidays), the destruction of anaerobic growth environment, effectively preventing the propagation of anaerobic bacteria.
(4) replacing the cooling water, clean circulating pool, pipelines, wells and sterilizing reflux.
(5) cooling water periodically supplemented with fungicide, to kill bacteria and prevent corruption substances.
(6) prohibits different miscible coolant between the components in order to avoid imbalance, affecting performance and cycle.
(7) coordinate the relationship between the cooling water use and management, enhance the use of on-site management and maintenance, to prevent pollution of immersion.
