After dismantling found Erdaogou static disc surface except a few marks, but no obvious signs of wear. These grooves are wrong because the movable gas disk surface caused by corrosion. This indicates that the static disc selection is successful. Vibration wrong gas head by moving the disc surface due to corrosion.
The question now is to choose the moving plate material, we get inspiration from stationary gas disk wrong bolts. When the cast iron stationary gas disk fault and serious damage due to the erosion, Ting Allen bolts exposed surface substantially no corrosion and erosion abrasion. This shows. Ting has good resistance to corrosion and erosion performance lubricants manufacturers which provides for the brake disc selection of a reliable basis, by the movable plate and the oil made from nylon with factory made stator paired, running well, from Look for wear, service life can be achieved at least a year or more. Because refueling inconvenience, oil long and other reasons, the main bearing and wrong gas head support sleeve long-term lack sufficient lubrication. To make the main bearing due to lack of oil and bush-burning.
Due to its high oil pressure, and the timing refueling, ensure these parts can be adequately lubricated. Reducing the burden operatives. Stirring the long axis of the support bearing modifications by the agitator stirring mechanism, a major axis, eccentric, eccentric Watts, stirring rocker bearings and other components. By turning the eccentric agitator driven back and forth, agitated suspension of crude sodium bicarbonate, in order to avoid precipitate.
The long axis of the support bearing the original design model for the single row tapered roller bearings. Can withstand large radial loads, but installation error or shaft deflection deformation is very sensitive. Due to the larger distance of about two support bearings, and stirring mechanism force in operation is a variable load, will inevitably lead to major axis bending, exacerbated the bearing wear. To produce large radial clearance. Thereby accelerating the eccentric and eccentric tile wear. Thus have an impact on the operation and production of the entire stirring mechanism. In order to improve the usage of bearings, we have tried in the double row self-aligning roller bearings. Zhangjiagang mill because there are self-aligning effect, reducing the axial deformation and mounting error sensitivity.
Reduce wear and extend the eccentric, the overall service life of tile and even eccentric stirring mechanism, stable production, through the use of more than one year, and achieved satisfactory results. In the production practice through continuous exploration and improvement, usage of filter base machine is getting better, a single daily production capacity has exceeded tons, much higher than its designed daily production capacity. A significant reduction in maintenance workload and improve the operation rate of the filter base machine production more stable, high-yield soda for my plant has laid a solid foundation.
