1 bearing temperature rise should be how to deal with:
When the bearing temperature rise, the first bearing nu 240 ecml determine whether misoperation, as did rise, should be treated as follows:

(1). Check the oil level gauge oil level is normal, if not normal, check whether the tank vent valve close. If you have secured, should fill oil, if it is a sealant gasket oil leakage, should stop processing.
(2). The oil sampling observation of bearing nu 240 ecml oil color is changing, and tests to see if spoilage. If the confirmation deterioration, downtime should be replaced with new oil.
(3). Check whether there is abnormal sound of bearing, and detection of the swing bearing is abnormal.
(4). Governor oil pressure should be checked, if oil pressure may lead to cooling water hydraulic valve.
(5). Check the cooling water pressure, flow and pipe system is normal. If low water pressure may be clogged filter, cannot be bearing nu 240 ecml handled in time, can be shut down, when the confirmation work, and then put into use.
2 reasons first, we first look at the bearing temperature rise:
(1). It is likely that oil deterioration bearing, oil itself is not clean or run oil deterioration, such as the oil in the water increase will cause oil acid increases, will reduce the bearing lubrication oil, erosion, resulting in high bearing temperature.
(2). Possibly because of the cooling water bearing interruption caused by.