Bearings are precision components, and therefore requested the use of a more cautious attitude, which is the use of thrust ball bearing high performance, if used improperly, can't reach the expected performance results, but also easy to make the bearing damage. Therefore, the use of bearing should pay attention to the following matters:
Even the eyes can not see the smile dirt into the bearing, also increase the bearing wear, vibration and noise.

Do not allow powerful punch, does not allow direct percussion bearing with a hammer, not allowed to pass through the rolling pressure. Hope in the installation, and then open the size of the bearing 22316 bearing package. General grease lubrication, no cleaning bearings, direct filling of lubricating grease. Oil lubrication, generally do not need cleaning, however, instruments or high speed bearings, to use the oil clean, remove antirust coating in the bearing. Remove the bearing, anti rust agent is easy to rust, so can not be placed.
size of the bearing 22316 bearing in operation after a period of time, will make some noise, this is very normal, but if this sounds very noisy is continuous, the bearing has the noise problem, why bearing noise?
Inner and outer ring, rolling body any split; the raceway surface, rolling rust and bruises; the raceway surface, edge, rolling card significantly hurt; rolling surface, rolling a significant indentation and trace on the body; inner and outer ring, rolling body, confrontation among them any a crack and present pieces; thermochromism; grease seal bearing sealing ring and a dustproof cover seriously damaged; keep serious or rivets wear loose frame; a creep inner diameter of surface or outer diameter and so on.